Home ꄲ 53000 Series-Gas Blower ꄲ 53100 Series-Roots Blower ꄲ 53102A TZR8-750NJS3(ZR8-750NJS3+ZR7-750NJS3) Blower

53102A TZR8-750NJS3(ZR8-750NJS3+ZR7-750NJS3) Blower

ꄴPrevious： 53103A TZR8-850NJS3(ZR8-850NJS3+ZR8-700NJS3) Blower

ꄲNext： 53101A ZL94WDATJ Roots Blower

Tag No.: 53102A

Model: TZR8-750NJS3(ZR8-750NJS3+ZR7-750NJS3)

Name: Blower

1^st stage compressor:

Inlet pressure: 25~35KPa G;

Inlet temperature : 50~60℃ ;

Inlet flow: 110000Nm³/h;

Outlet pressure: 110~130KPa G

Average molecular weight of conveying medium: 18.196

Transmission medium adiabatic index k: 1.358

Model selection proposal:

Name	Data
Blower model	TZR8-750NJS3 (ZR8-750NJS3+ZR7-750NJS3)
Local atmospheric pressure Po (kPa ABS)	100
Inlet pressure Ps (KPa G)	25
Discharge pressure Pd (KPa G)	120
Blower inlet temperature ts (℃)	60
Blower speed (r/min)	590
Blower boost (KPa)	95
Blower shaft power (KW)	1650
Exhaust temperature of 1^st stage blower (°C)	95(The outlet pressure of the 1^st stage blower is about 170kPa ABS)
Secondary blower exhaust temperature (°C)	80
Blower inlet flow rate (m³/min)	920 (55600Nm³/h)
Blower inlet flange diameter (mm)	800
Blower outlet flange diameter (mm)	700
Motor (number of poles, power)	10-pole 1800kW double-shaft extension explosion-proof motor
Remark	Two TZR8-750NJS3 blowers meet the user's requirements with a flow rate of 11000Nm³/h; the flow parts of the blowers are made of 304 stainless steels; the mechanical seal uses demineralized water as the flushing fluid; the first blower ZR8-750NJS3, the secondary ZR7-750NJS3; ≤ 45 °C

Note : Calculation and selection based on the inlet temperature of 70℃, inlet pressure of 110kPa G, boost pressure of 90kPa, and local atmospheric pressure of 100kPa.

For more information, please contact us by email sales@wintekgroup.com

Key Words: Blower, Roots Blower, Motor

Product Center