Home ꄲ 53000 Series-Gas Blower ꄲ 53100 Series-Roots Blower ꄲ 53103A TZR8-850NJS3(ZR8-850NJS3+ZR8-700NJS3) Blower

53103A TZR8-850NJS3(ZR8-850NJS3+ZR8-700NJS3) Blower

ꄴPrevious： 53104A LR9-900NJSⅢ Roots Blower

ꄲNext： 53102A TZR8-750NJS3(ZR8-750NJS3+ZR7-750NJS3) Blower

Tag No.：53103A

Model：TZR8-850NJS3(ZR8-850NJS3+ZR8-700NJS3)

Name：Blower

Secondary compressor:

Inlet pressure: 110~130KPa G;

Inlet temperature : 60~70℃;

Inlet flow: 110000Nm³/h;

Outlet pressure: 200~220KPa G

Average molecular weight of conveying medium: 18.196

Transmission medium adiabatic index K: 1.358

Model selection proposal:

Name	Data
Blower model	TZR8-850NJS3 (ZR8-850NJS3+ZR8-700NJS3)
Local atmospheric pressure Po (KPa ABS)	100
Inlet pressure Ps (KPa G)	110
Discharge pressure Pd (KPa G)	200
Blower inlet temperature ts (℃)	70
Blower speed (r/min)	590
Blower boost (KPa)	90
Blower shaft power (KW)	1980
Exhaust temperature of primary blower (°C)	95 (the outlet pressure of the primary blower is about 262kPa ABS)
Secondary blower exhaust temperature (°C)	62
Blower inlet flow rate (m³/min)	1120(114000Nm³/h)
Blower inlet flange diameter (mm)	900
Blower outlet flange diameter (mm)	700
Motor (number of poles, power)	10-pole 2200kW double-shaft extension explosion-proof motor
Remark	The flow rate of 1 blower is 110000Nm³/h ; the flow parts of the blower are made of 304 stainless steel, and the mechanical seal uses demineralized water as the flushing fluid; the first-stage blower is ZR8-850NJS3, the second -stage blower is ZR8-700NJS3; the inlet gas temperature of the second-stage blower is ≤ 45 ℃

Note : Calculation and selection based on the inlet temperature of 70℃, inlet pressure of 110kPa G, boost pressure of 90kPa, and local atmospheric pressure of 100kPa

For more information, please contact us by email sales@wintekgroup.com

Key Words: Blower, Roots Blower

Product Center